Stage 3 JT Gladiator Front 3 Link and Rear Double Triangulated Kit

Your Price: $18,199.99

Part Number: RPM-3090

Availability: 3-4 Week Lead Time

Axle Type *

Sway Links *

Bump Can Mount Option *

Fuel Tank *

Quantity

Description

JT Bolt-In 3 Link Front and 4 Link Rear Double Triangulated Long Arm Kit

We set out years ago to design a double triangulation for the JKU that solved many challenges and restrictions with the JK platform. Now we are taking that technology into the JL/ JT platforms. We gave up a small amount of belly height (not a flat belly) to achieve better anti-squat and roll center numbers. The results were incredible and if our recommended rear axle separation is used a 94 anti-squat can be achieved on a JT. There is no need to remove the body for installation.

Kit includes:

Bolt-in front cross member with lower link mounts
Bolt-in driver side frame third link mount (Passenger side available with aftermarket axles. Please call)
Bolt-in reinforcement brackets for driver side cross member
2.25" 7075 T6 aluminum lower links w/Rock Jock narrow joints at both ends
1.75" 7075 T6 aluminum upper link w/Rock Jock narrow joint at frame and custom uniball at axle
(1) Pair of Front Quick Disconnect Sway Links (Optional Rubicon Aluminum Pro Links. Pictured in stock photo.)
Rear weld in laser cut crossmember with lower link mounts
Rear weld in upper link frame side mounts
Truss top 4 link mounts (truss not included)
Axle side lower control arm mounts
(2) 1.75" solid 7075 T6 aluminum links with narrow Rock Jock Johnny Joints
(2) 2.25" solid 7075 T6 aluminum links with narrow Rock Jock Johnny Joints
(1) Skid Plate 1/4" laser cut and CNC broke smooth bottom
(1) Engine Skid Plate 1/4'' laser cut and CNC broke
Includes all grade 8/10.9 hardware
(2) Front 12'' Coilover Towers
(2) Rear 14'' Coilover Towers with Support Crossmember
(2) 12'' ADS Coilover with Resi (Adjustable Dampening Clicker Knob) equip with AGM Sliders and Hyperco Springs
(2) 14'' ADS Coilover with Resi (Adjustable Dampening Clicker Knob) equip with AGM Sliders and Hyperco Springs

****NOTE**** 3.6L Gas Engine users will need to install an Exhaust Loop Delete kit such as the AFE Part number 48-48024 or Magnaflow Part number 19432 or similar.

PLEASE NOTE:

This kit requires:

Custom exhaust modification
Cutting, Drilling and Welding
The side JT factory fuel tank must be removed and replaced with an aftermarket gas tank rear of the axle or in the bed.
Rear axle to have a truss (not included)

68.5'' Min Width Axles
Stock Rubicon/ Wide Track Axles require min 3.5'' BS wheels up to 40's
Hemi Swapped? Call for correct spring rates
Deleted Diesel? Call for details.
Rear requires Rock Jock Anti Rock Sway Bar System
Custom Length Brake Lines and Routing Required

Item In Cart

Stage 1 JT Gladiator Front 3 Link and Rear Double Triangulated Kit

3-4 Week Lead Time

$9,999.99

Select Options

Item In Cart

Stage 2 JT Gladiator Front 3 Link and Rear Double Triangulated Kit

3-4 Week Lead Time

$11,499.99

Select Options

Stage 3 JT Gladiator Front 3 Link and Rear Double Triangulated Kit

Choose Options

JT Bolt-In 3 Link Front and 4 Link Rear Double Triangulated Long Arm Kit

Related Items

Browse Similar Items