
Before RPM Was Suspension, There Was Steering
If you’ve spent any amount of time around the off-road world, you’ve probably heard the name RPM Steering & Suspension.
And if you’ve been around long enough, you probably know RPM for the big aluminum steering, the massive links, the big star logo, the suspension systems, the events, the wheeling, and the people behind the brand.
But before RPM was talking about long arms, suspension geometry, armor, ball joints and all the other things you can find on the website today, there was one thing at the center of it all:
Steering.
And honestly, that’s where I think the RPM story gets pretty interesting.
Because RPM didn’t start with the idea of, “Hey, let’s make a bunch of off-road parts and see what sells.”
It started with a much simpler question:
Why are we bending this stuff?
It Started With Breaking Things
RPM is a family-owned company, and the roots of the company came from actually building and using off-road vehicles—not sitting behind a desk trying to figure out what an off-roader might want.
After watching steel steering components get bent on the trail, the team started looking for a better answer.
Because here’s the thing about steering:
You can have the biggest tires.
You can have the coolest suspension.
You can have thousands of dollars in axles.
You can build the baddest Jeep at the trailhead.
But if your steering isn't doing its job, none of that matters very much.
Don’s answer was aluminum.
Not just any aluminum, either. Don builds its steering links from USA-sourced 7075-T6 solid cold-finish aluminum, an aerospace-grade material chosen for its combination of strength and its ability to spring back rather than simply taking a permanent bend.
That became such a big part of the company's identity that Don and Michelle eventually earned a pretty fitting nickname:
The aluminum company.
And if you've ever picked up one of their steering links, you understand why.
These things are not exactly subtle.
So Why Does Steering Matter So Much?
This is one of those things that gets overlooked until something goes wrong.
Steering isn't just an off-road problem.
Your steering system is working every single time you drive your vehicle.
On the highway.
Pulling your trailer.
Driving to work.
Going down a dirt road.
Climbing a ledge.
Dropping into a rock obstacle.
Turning a giant tire against an obstacle.
And that means your steering is constantly dealing with loads, vibration, impacts, weight and movement.
Now add a lift.
Add 37s.
Add 40s.
Add beadlocks.
Add a heavy bumper.
Add a winch.
Add a trailer.
Then take all of that and point the vehicle at a rock.
Suddenly those factory steering components have a pretty big job.
That’s why I like the way RPM approaches steering.
The goal isn't simply to make something that looks bigger.
The goal is to build a steering system that makes sense for the vehicle and how you're actually using it.
Why Aluminum?
This is probably the biggest question people have the first time they hear about RPM.
"Wait…you make steering out of aluminum?"
Yep.
And that's actually the whole point.
RPM uses solid 7075-T6 aluminum links rather than simply making a heavier version of the same steel component.
The company says the material provides spring-back characteristics, meaning that when it encounters a load, it can return toward its original shape rather than permanently bending like a conventional steel link might. RPM is so confident in its center sections that it offers a lifetime bend-or-break warranty.
And there's another benefit that becomes pretty important when you're building an off-road vehicle:
Weight.
There's something to be said for adding strength without just continuing to add weight everywhere.
That philosophy is really at the heart of RPM.
Build it strong.
Build it smart.
Build it for the way people actually use their vehicles.
And This Is Where RPM Gets Really Interesting
RPM isn't a one-size-fits-all steering company.
One of the things that has always stood out to me about RPM is how many different steering solutions they've developed for different axles, vehicles and applications.
Their current steering lineup covers a pretty wide range of platforms, including:
- Jeep JK / JKU — 2007–2018
- Jeep JL / JLU — 2018+
- Jeep JT Gladiator — 2018+
- Jeep XJ / TJ / LJ — 1997–2006
- Ford Super Duty F250/F350 — 2005+
- Ram 2500 — 2014+
- Ram 3500 — 2013+
And that's before you start getting into the different axle configurations, steering systems, drag links, tie rods and 2.5-ton applications.
For the Jeep crowd, that includes everything from traditional JK steering to heavy-duty JL/JT systems and applications for swapped axles from companies like Currie and Dynatrac.
And RPM has continued taking that same philosophy into the full-size truck market.
Their Ford Super Duty systems, for example, use massive solid 7075-T6 aluminum links, including a 2.25-inch tie rod and 2-inch drag link, designed around the weaknesses that show up when you combine heavy trucks with bigger tires, lifts, towing and off-road use.
The Ram systems follow the same basic philosophy, with 2.25-inch solid aluminum tie rods and 2-inch aluminum drag links, along with heavy-duty ends and RPM's Posi-Lock jam-nut system.

From Steering to Suspension
Eventually, it only made sense for Don and Michelle to start looking beyond steering.
Because once you've spent years building vehicles and figuring out how to make them steer better, you start looking at the rest of the vehicle and thinking:
"Well…we can probably make that better too."
And that's where RPM's evolution into suspension began.
Today, the company offers much more than steering.
There are long-arm suspension systems.
Coilover and ORI towers.
Ball joints.
Track bar solutions.
Axle trusses.
Armor.
Fuel tank systems.
And complete suspension packages for platforms like the JK, JL and JT.
The company has particularly expanded its JT Gladiator suspension lineup, including Stage 1–3 long-arm systems designed around suspension geometry rather than simply throwing more lift at the vehicle.
But here's the part I think is important:
The suspension side didn't replace the steering side.
It grew out of it.
The same mentality is still there.
Find the weak point.
Figure out why it is failing.
Build a better solution.
Test it.
Put it on vehicles.
And then listen to the people actually using it.
It's More Than Parts
This is probably the part of RPM that gets lost when you're just looking at a product page.
RPM isn't just a parts company.
The people behind the company actually use these vehicles.
They wheel.
They build.
They race.
They tow.
They break things.
They fix things.
They talk to customers.
And they pay attention to what is happening out in the real world.
That matters.
Because there is a pretty big difference between designing a part because it looks good in a catalog and designing a part because you've personally watched the original part fail on the trail.
RPM's own story talks about that connection between the products and the real-world problems that created them. Don Rycroft has also talked publicly about those early failures, the trial and error involved in developing RPM, and the responsibility that comes with making components people depend on.
That's a pretty good foundation for a company.
And That's Why Steering Still Matters
With everything RPM makes today, it's easy to forget where it started.
But I don't think you should.
Because steering is still one of the most important parts of any build.
It's not necessarily the part everybody notices first.
Nobody walks up to a Jeep at the trailhead and says,
"Man, check out those incredible steering components!"
They're looking at the tires.
The suspension.
The axles.
The armor.
The paint.
The stance.
But when you're behind the wheel, steering is one of the things you feel immediately.
You feel it when the truck tracks straight down the highway.
You feel it when the steering wheel isn't wandering all over the place.
You feel it when you're climbing a rock and trying to put a tire exactly where you want it.
And, perhaps most importantly, you notice it when something isn't right.
That's why I think RPM's roots are important.
The company didn't start by trying to be everything to everybody.
It started by trying to solve one problem really well.
Steering.
Then it kept solving problems.
And that's how you go from a company known for aluminum steering to a company building complete steering and suspension systems for everything from an old TJ to a modern Gladiator, a built JK, a Ram 3500 or a Ford Super Duty.
That's a pretty cool evolution.
And if you've followed RPM for a while, you know the story isn't finished yet.
Because around here, there's always another vehicle to build, another trail to conquer, another weak point to find…
…and, inevitably, another problem somebody is going to want us to solve.
That's RPM.
Built by people who use the parts.
For people who use their vehicles.
On Monday morning.
And on the hardest trail they can find that weekend.
