2007-2018 Front ORI Strut Towers JK/JKU
Our RPM Steering Coilover or ORI towers are designed with a slight lean outward to allow a 14" Coilover/ ORI full range of motion without a need for notching the frame on a JK/JKU. In addition, we run an 8.5" wide base so that the Coilover/ ORI will not rub on the tower when moving front to rear. These 1/4" steel towers are weld in ready for your JK Coilover/ ORI build.
- It comes with pre-welded top cap and shock tabs. Ready to weld to the frame.
- These towers require full-width axles 69'' Minimum Width. It does not work on stock width JK Axles.
- Sold as a pair.
- Shock tabs are 1/2'' bolt holes.
- 1.50'' tab spacing on Coilovers Towers.
- 1.60'' Tab spacing on ORI Towers.
- *****12'' Coilover/ORI's Not recommended with this tower. See Part RPM-3044.